Item number: M360A
Peak power measuring instrument and characteristic curve tracer for photovoltaic systems
With auto-ranging up to 1000 V / 20 A / 20 kW
The PROFiTEST-PV permits measurement of characteristic IU curves, as well as individual photovoltaic modules and strings.
Connect > Switch On > Start Measurement > Read Results > Done!
With the help of a patented process, the instrument is capable of ascertaining peak power, internal series resistance and internal parallel resistance directly on-site “with only one measurement and without entering module data”, which are then indicated at a highßresolution color graphic touch-screen which is suitable for use in sunlight.
Troubleshooting in PV systems, as well as documentation of system quality, are executed quickly and economically during initial start-up and subsequent testing without a long learning curve.
This simple yet decisive test assures safety for the customer and eliminates consequential costs for the installer.
Measured peak power can, for example, also be used in order to determine peak ratio. Beyond this, acquired characteristic curves make it possible to draw further conclusions regarding the electrical characteristics of the measured module or string. And thus, the tester is also suitable for use in research and development.
Product Highlights
- CAT IV DAkkS calibration certificate
- Bidirectional data exchange
- Port for RFID readers, barcode scanners
- Includes ETC software (Electrical Testing Center) incl. report templates acc. DIN VDE 0100-600, lightning protection system acc. DIN EN 62305, concrete-footing ground electrode acc. DIN 18014
- Universal connector system
- All measurements per VDE0100, part 600 and per GOST R (ГОСТ Р) 50571.16-99
- Testing of residual current devices (RCCBs)
- Loop and line impedance measurement
- Voltage drop measurement
- Measurement of insulation resistance using nominal voltage, with variable or rising test voltage
- Low-resistance measurement
- Earth resistance measurement
- Standing-surface insulation measurement
- DIN VDE 0100-600 / IEC 60364.6
Your advantages
PROFITEST – versatile and future-proof
- Intuitive operation
- Efficient work
- Standards-compliant testing
- Legally secure documentation
PROFITEST – saves time and money
- As single test instrument for a broad range of applications
- All measurements without any bothersome replugging of the measurement cables
- Can be used all over the world thanks to language selection
PROFITEST – even 10 years down the road
- Future-proof thanks to firmware updates
- 10-year service guarantee
- DAkkS certificate issued by own calibration laboratory
- User support for questions about testing
PROFITEST – quick and easy report generation
- Cascadable, future-proof software concept
- Modern data management by means of customer and measurement data administration
- Creation of system structures – from the system all the way down to the measuring points
- Quick and easy generation of a legally secure report per ZVEH
PROFITEST – reliable measuring and testing
- Easy operation with rotary switch
- Predefined test sequences for structured testing
- On-site help thanks to help function with wiring diagrams
- Measuring category: 600 V CAT III / 300 V CAT IV
- 4-wire measuring method – no compensation of the measurement cables is required
Applications
- Broad-range measuring device for all alternating and 3-phase electrical systems with voltages from 65 to 500 V and frequencies of 15.4 to 420 Hz
- Loop and line impedance measurement with DC bias magnetization
- Measurement of insulation resistance using nominal voltage, with variable or rising test voltage
Low-resistance measurement with automatic polarity reversal
- Testing of residual current devices and special RCCBs (selective S, SRCDs, PRCDs, Schukomat, Sidos, types G/R, AC, A, F, B, B+, EV and MI)
- Testing of RCCBs in IT systems
- Testing of insulation monitoring devices (IMDs)
- Testing of residual current monitoring devices (RCMs)
- Measurement of earth resistance (mains/battery operation)
- Leakage current measurement with PRO-AB adapter
- Standards-compliant testing of charging stations per IEC 61851 in combination with the PRO-TYP I/II test adapter
- Testing of type S and K PRCDs with the PROFITEST PRCD
- Residual voltage measurement per EN 60204
- Automatic test sequence function USB/Bluetooth port
- Push-print function – transmission of the measured value after measurement
Accessories
