METRALINE PRO-TYP EM III

Item number: Z525H

Test Adapter for Electric Charging Points (single/3-phase, type 2) for PROFITEST incl. schuko socket and interchangeable test plug

• Vehicle simulation (CP)
  Vehicle states A through E are selected with a rotary switch.
• Cable simulation (PP)
  The various codings for charging cables with 13, 20, 32 and 63 A, as well as “no cable connected”, can be simulated with the help of a rotary switch.
• Fault simulation
  Simulation of a short-circuit between CP and PE by means of a rotary switch
• Indication of phase voltages via LEDs
  Depending on the charging station, either one or three phases can be active.
• Testing of electric charging stations with permanently attached charging cable by means of an extended CP test pin

Regarding vehicle simulation (CP)
States A, B, C and E can be simulated in accordance with IEC 61851. The various vehicle states are selected by means of a rotary switch.

• State A – no vehicle connected
• State B – vehicle connected but not ready for charging
• State C – vehicle connected and ready for charging, venting of the charging area not required
• State E – error: Short circuit between CP and PE via internal diode

Regarding cable simulation (PP)
The various codings for charging cables with 13, 20, 32 and 63 A can be simulated. It’s also possible to simulate the “no cable” state.

The various charging cables are simulated by connecting different resistances between PP and PE with the help of a rotary switch. The following values are possible in accordance with IEC 61851:

• No cable – 0 Ω
• 13 A cable – 1.5 kΩ
• 20 A cable – 680 Ω
• 32 A cable – 220 Ω
• 63 A cable – 100 Ω